The Aquasana AQ-5300+ Under Sink Water Filter is a point-of-use water filter that’s among the best 3 stages under sink water filters. With its specification, it is not a mystery why it is a highly popular product. This under-sink water filter fits any budget and is very effective in removing unwanted contaminants such as pesticides, heavy metals, chlorine, and even herbicides.
The AQ-5300 is marketed by Aquasana as a “The Claryum 3-Stage Max Flow” water filter. It’s under-sink water filter hats installed at the point of use or installed in the existing plumbing under your sink. This ensures that all the water from your faucet is filtered. This filter comes with all the bells and whistles, including all the certifications you need.
Aquasana AQ-5300+ has two under-sink models, the AQ-5300+.55 and the AQ-5300+.56. The only difference between the two is that they come with nicer faucet options. The AQ-5300+.55 has a bronze faucet, while the AQ-5300+.56 has a chrome faucet.
If the water in your home has a bad odor, sediment, or mild TDS, an under-sink water filter may be your solution. Every under sink water filter is designed to treat tap water before it gets to the kitchen sink. This kind of filtration will ensure that sediments, physical and chemical factors are removed from the water, providing quality, clean and crisp water.
Aquasana AQ-5300+ Drinking Water Filter Review
Aquasana’s Claryum® filtration technology is tested and certified according to NSF/ANSI 42, 53 (including P473) and 401. Aquasana under-sink water filtration systems has four different filtration stages that include an activated granular carbon filter, a multimedia block, an ion-exchange filter and a sub-micron filter.
These four steps will effectively eliminate all contaminants from your water. Its filtration methods have been independently tested and certified by Underwriters Laboratories and the California Department of Public Health. It is capable of filtering up to 30 gallons of drinking water per hour.
|The most economical filter on the market .|
|Makes your water healthier and it tastes better|
|The most economical filter on the market at less than 10 cents per gallon filtered|
|Replacement parts are easily available.|
|Customer service provides valuable assistance.|
|Installation can easily be done by yourself and their under counter filter systems come with written instructions as well as video instructions.|
|With their free ‘water for life’ program you get a lifetime warranty on their products|
|Their products are made in the USA|
|They have a 90-day money-back guarantee – they stand behind their products.|
|The whole unit weighs only 4 pounds.|
|The minimum operating pressure is 20 psi (pounds per square inch) and the maximum operating pressure is 80 psi.|
|The minimum operating temperature is 40 degrees F and the maximum operating temperature is 90 degrees F.|
|Water flow was lower than reported. This was apparent from the AQ-5200.|
|Some tubes went out and the O-rings failed, which can be very problematic.|
|O-rings are known to wear down after 2-3 years of usage.|
|Does not remove Flouride|
What does Aquasana filter out?
The AQ-5300, 3-Stage Max Flow filters are based on Claryum technology, which includes:
1. Activated Carbon – Reduction of pharmaceutical products, pesticides, herbicides, VOCs and MTBE.
2. Catalytic Carbon – Focuses on chlorine and chloramines.
3. Ion-exchange- Filter heavy metals like lead and mercury.
4. Absolute Sub-Micron Mechanical Filtration- Captures asbestos and chlorine resistant cysts like Cryptosporidium and giardia
It reduces chlorine and chloramines by over 97%, lead by 99% and PFOS by 96%, but does not remove natural trace elements that are so important for our health.
How to Install Under Sink Water Filters
Installation is often a breeze. Their filters need to be replaced every 6 months or every 800 gallons. It also depends on how heavy you use the system. Early replacement may be required if you are a heavy user of the system.
The AQ-5300 utilises the AQ-5300 R filter set. This set has the necessary tools to remove the filter and also includes a battery warning that will sound when the filters need to be replaced.
If you are not generally afraid to change a light bulb, then you should have no problem installing an under-sink water filter. Most under-sink water filters screw onto the valve that exists below your sink. When the water is turned on, it goes through the filter first, then gets to your sink. The process is fairly simple and straightforward.
All you that you will require, need with the exception of a few tools, is delivered with the kit. Before you start, please read the safety information in the kit installation manual.
Step 1: Detach the water tubing in the cold water shut off valve under the sink by simply undoing the nut 90° anticlockwise and removing the tubing from the valve fitting. A template is provided that you can use to check out the details before drilling begins.
Step 2: Briefly position the filter on the wall cabinet and level the filter on the wall to mark the bolt fixing points for the mounting bracket. Drive a couple of screws and stick in the wall the mounting bracket.
Step 3: Plug the tube from the kit into the filter and tighten the filter on the wall cabinet. Place the mounting screws on the wall. Connect the tubing that leads from the filter into the shut-off valve.
Step 4: Complete the final connection to the valve shaft. Briefly tighten the filter, select the cold adjustment and load the device with water.
Buying Guide for Under Sink Water Filter Systems
High quality under sink water filters should be equipped to remove all kinds of chemicals and germs by using multiple different filtering steps in a single unit. Overlaying these steps ensures adequate filtration that you and your family need.
Of course, not all under-sink water filters do the same thing. The Aquasana AQ-5300+ is not cheap. It is a good bargain for its price though, because it filters out good quality water. Also, its also relatively easy to install as some of its competition. The certification one gets from Aquasana is second to none, which I believe is important to someone looking to purchase them.
1. So, what should you look for regarding the performance of your under sink water filters? First, you need to make sure that you are looking for a product that is NSF certified.
2. An undersink water filter system should effectively remove most of the contaminant categories that are currently in our drinking water supply, not just chlorine.
3. High quality under sink water filters should be equipped to remove all kinds of chemicals and germs by using multiple different filtering steps in a single unit. Overlaying these steps ensures adequate filtration that you and your family need.
4. Most under-sink water filtration systems have four different filtration stages that include an activated granular carbon filter, a multimedia block, an ion-exchanger filter and a sub-micron filter. These 4 steps will effectively eliminate everything that is in your water.
Choosing the best under sink water filter mostly depend on where you live. Choose one that will serve your water needs while giving you a top-notch experience and the best bang for your buck.
Finding the best under sink water filter system depends on your preferences and how often you’re using the system. Even the best filter system will need some frequent filter changes and some maintenance. However, maintaining an expensive filter is probably less expensive than buying a cheaper system every two to three years.
An undersink water filter system should effectively remove most of the contaminant categories that are currently in our drinking water supply, not just chlorine.
What is nice about these systems is that there have been many improvements that have been made these filters easy for the average homeowner to install in a few minutes. There have been improvements also to extend the life span of the filters so it is not necessary to change the filters frequently as it has been in the past.