Best Sediment Filter For Well Water

Let’s begin by pointing out that all sediment filters have one thing in common, the ability to filter depending on the size of the microns. By definition, a micron is “one metric unit length to one millionth of a metre”, which is extremely small to the naked eye.

A human hair has an approximate diameter of 25 microns. If a filter is rated at 5 microns nominal, it means that 80% of the pores on this filter are 5 microns and the rest could be bigger. If it is rated at 5 absolute microns then 99.9% of the pores are 5 microns and the rest might be bigger.

If you have a standard size water filter enclosure, you are not enclosed in a single variety of water filter cartridges. With many different types and size of sediment filter to buy, you might want to pick out the ideal micron size filter for you since out there, there is no “one size fits all” water filter. 

It is recommended to select a micron size larger than the sediment type to make sure that the deposit passes through and is filtered. Water concentration is also an important factor because it will determine the lifespan of your sediment filter. Various water sources have diverse concentrations of water.

In our review, we give you a thorough guide that highlights the best selection of sediment filters with the best cases to use with their pros and cons.

Best Sediment Filters for Well Water

1.    iSpring WSP-50SL  Spin-Down Reusable Whole House Sediment Water Filter

iSpring Spin-Down Sediment Filter is a pre-sediment filter that acts directly to remove the biggest particles from the water intake. This sediment filter allows all other plumbing fixtures in your home to be used for an extended period of time before being plugged.

 It uses siliphos filter cartridges that are known for their thin paper appearance that looks like a tightly folded piece of paper in the form of a circle. The material consists of sodium, calcium, magnesium and silicate.

For effective filtration, it is fitted with a fine stainless steel barrier. The mesh first filters the water of all impurities and then goes down to the spin-down filter. It is evaluated to 50 microns, which increases its points as the first water filter for homes.

While we’re at it, we have five different options for micron size. Even more practical is the transparent enclosure which allows visual monitoring. This allows you to track the progress of his work and thus determine when or not to flush the filter.

In terms of cleanliness and maintenance, it’s a matter of how long it would stay as new. Its longevity and efficiency are dependent on the quality of its maintenance and the durability of the materials used in its manufacture. Rust and corrosion will be a problem of the past thanks to the patented siliphos material designed to prevent scaling of your pipes and devices.

The iSpring Spin-down water filter valves were redirected to be aligned on the filter. It also includes hose barb connections to the valve for flusing. To flush the sediment filter, just turn the valve over the system. It is important to flush your sediment filter each time to avoid clogging. This will keep your water filter running efficiently.

This water filter has the lowest pressure drop of 20 psi because of the thickness and mostly.  It can be washed and reused more than once before being discarded. It has a much larger surface than any non-pleated filter. The installation process is also easy with dual 1” MNPT and ¾” FNPT threads on both ends.

Pros
There are five different micron ratings to choose from
The control valve is simple to operate
Durable thanks to heavy-duty solid brass
Clear sediment housing enhances visibility
Easy installation
Cons
Does Not lower TDS

2. Aquaboon  6-Pack ( 5 Micron 10″) Cartridge Sediment Water Filter  for Any Standard RO Unit and Whole House Sediment Filtration

Aquaboon sedimentary filters use a cost-effective sedimentary filter cartridge. It is a widely viewed sediment filter which is easily noticeable for its hard-like cotton look and it looks like a clean white paint roll. Extruded filters are a full-featured medium filter that can be used in almost any situation.

The Aquaboon sedimentary filter cartridge is a 5 micron filter cartridge made up of 5 different layers. Its typically done to have the biggest micron on the outer layers to the smallest micron on the inner layers.

 The evaluation of this filter is based on the smallest micron and the largest internal layer of the filter. The sediments filter is also made of polypropylene, a type of thermoplastic that can be melted and bound.

The filter operates by increasing the surface of the water to filter the contact which ultimately decreases the amount of water pressure drop (which is good). This kind of filter is more practical if the goal is to remove silt, oil, grease and other forms of sand. This filter is usually used as a general filter to remove more than the previous one (i.e. Dirt, Particulate rust/Iron, etc.

Its micron rating is nominal which means that 80% of the pores on the filter are 5 microns and the rest might be larger. Every replacement case is unique, but the manufacturer recommends doing so every 4 to 6 months. A complicated sedimentary problem means that you replace the filter more frequently.

Pros
Easy to install
Value for money
 Efficient sediment filtration
 Can be used for a wide range of application
Cons
Quality control issues

3.  EcoPure EPWHE Sediment Water Filter

For dirt, silt, sand chlorine taste and odors, the EcoPure sediment filter uses its NSF-certified roll-up sediment filter to remove these contaminants. It is a nominal 5 micron sediment filter made of polypropylene as well. The sediments filter is encapsulated, so you don’t have to touch the filter. Plus, it’s easier to replace. 

In addition, you do not need to turn off your water supply, thanks to its built-in diversion mechanism. This sediment water filter has one of the most important pressures and dust retention capacity. It is therefore not advised to use it in case of large quantities of oil and grease. This is because the oils fasten to the surface of the filter, it deliberately obstructs the filter, increasing the pressure drop until it is completely clogged.

It is recommended to change the filter every 6 months to continue to enjoy the best quality of water and protect your plumbing and appliances.

Pros
Provides cleaner, clearer, better-tasting water
Easy to install
 Value for money
Cons
Less durable

4. Rusco 1-1/2” Spin Down Separator Sediment Water Filter

The need for clean water is so important for any home and maybe you have a well that releases both sand (large particle) and silt (small particle). Another circumstance is water from a pond or stream that contains large amounts of organic material. This water can be effectively filtered using this RUSCO spin-down sedimentary filter.

The spin-down sediment filter is intended to capture large particles. The design of the head deflects the water in the chamber in a way that makes the water flow through the housing. During the process, dirt and debris are pushed outwards to the clear case and allowed to sink into the bottom. 

The RUSCO sediment filter eliminates suspended matter from the water. This filter is the longest lasting polyester pleated filter due to its material. It has a stronger resistance to bacterial growth. The material is made of pleated nonwoven polyester fabric which is glued to the ends with thermosetting plastisol. The filter resists many chemicals and bacterial damage, making it a great choice to remove suspended solids from non-chlorinated well water.

They can also be reused and cleaned thanks to their easily removable transparent lid. Backwash of the filter is based upon time or total water consumption. The system is also easy to install.

Pros
Easy installation and maintenance
Value for money
Efficient sediment filtration
Reusable and flashable
Cons
Does not filter TDS

5. PUREPLUS 5 Micron 10″ x 4.5″ Whole House Big Blue Sediment and Activated Carbon Water Filter Replacement Cartridge.

Check Latest Price

This is another ‘melt-down’ sediment filter spun for filtration at the entry point. It is considered a 5 micron absolute filter that is sufficiently effective to remove 99% of chlorine, silt, sand sediments and colour. It is one of the most effective and reliable water filters of sediments. The filter has been tested and certified by Food Grade Material in accordance with European standards CE 1935-2004, Australia WaterMark, TUV, ROHS, REACH, BPA FREE.

Generally, it is made of three-layer density PP and Coconut Shell Activated Carbon Layer to remove most contaminants. Multilayer density technology is made from the largest micron on the outer layer to the smallest micron on the inner layer. This filtration method will capture impurities intended to provide pure drinking water.

The activated carbon filter block has a large area to capture more sediment while improving the taste of the water and removing taste and odours. The process takes place through adsorption where organic matter, compounds and sediment bind to the surface of the carbon and rods. The activated carbon filter is made out of the coconut shell that is a renewable resource. 

The filter has also undergone tests to withstand “hummer events”. Each time you turn on the tap and turn off the tap, the water flow goes through the filter housing when the tap closes, it creates a water hammer event. In other words, the inertia of the water stream stops and the energy goes somewhere.

This often leads to bending or shifting of the housing. Eventually, the housing may begin to crack. This sediment filter has been tested with a 1000 water test hammer and may last 30% longer than the other standard type.

Pros
Efficient sediment filtration
Efficient carbon filtration
Easy installation
Value for money
Good flavor
Cons
Less durable

Final Verdict

Sediments occur in numerous ways and each circumstance is unique. On the basic level, a filter is needed for the whole house. Why the whole house? Because sediment has an effect on everything. This is an entire house problem so you will need an entire house sedimentary filter. 

A whole house water filter is better in all respects. The flow regulator will be higher, pressure loss will be lower, the time between filter changes will be longer and the water filter cost will be less per square inch. The correct dimensions for a home application should be 20’x 2.5”’, 10” x 4.5”’, and 20” x 4.5′.

The 5 micron purple sediment filter is a complete sediment filter certified by well-known institutions. This filter uses a multi-stage filtration which is a multiple filter layer with a lower micron water filter for each subsequent filter step. Filtration steps include activated carbon filters that are efficient at capturing sediment and many other contaminants while eliminating taste and odour.


Conclusion

Well water is far and away the least expensive method of water supply. A good sediment filter plays an important role in keeping families safe by consuming well water.

This is because, although they experience fewer problems with water availability, they are at greater risk of having their plumbing systems clogged with sediment that incur an additional cost.

Even if your water filter works well, you can still test new filters to find better performance a variety of media perhaps better than another. 

Best Water Filter Pitchers for Lead: (Compared & Reviewed)

Marcus Reynolds
follow me
Latest posts by Marcus Reynolds (see all)