FAQs

Ionized alkaline water, on its own, does not cure cancer or other diseases. However, it provides the tools your body needs so that your body can heal itself as nature wanted.

Ionized alkaline water has the characteristics of the best and most natural water found on our earth before the earth was polluted. Ionized alkaline water, as it is alkaline, it has more oxygen in it than other kinds of water which are acidic.

The problem a lot of health professionals have with alkaline water is not its safety, but rather the health claims that are made on it.

There is insufficient science to support the use of alkaline water as a treatment for any health problem. Consuming natural alkaline water is generally considered safe because it contains natural minerals.

However, you should be cautious about artificial alkaline water, which probably contains fewer good minerals than its high pH would suggest, and may contain contaminants. Keep in mind as well that drinking too much alkaline water can leave you deficient in minerals.

Category: shower filters
.gb-block-image img{vertical-align:middle;}
Can you smell chloramine?

As a disinfectant in water treatment plants, chlorine, in particular monochloramine, a compound that is comprised of chlorine and ammonia in a concentrated form, is used.

Monochloramine is a compound derived from chlorine and ammonia. As a disinfectant, monochloramine has a longer half-life when used at low concentrations compared to other disinfectants.

Depending upon the circumstances, this residual is capable of keeping water clean for up to two days even in a stagnant setting.

While monochloramine is more stable than sodium hypochlorite, which is the more common counterpart used in water treatment, the presence of monochloramine may only last a short time before it starts to break down before it gets to your tap, depending on how long it has been transported via pipes and reservoirs.

When the water temperature is at its highest during the time of the year, monochloramine is normally broken down more rapidly. Monochloramine disinfection is more effective during this time.

Eventually, the disinfectant will lose its effectiveness, and microbes will start to multiply, thereby turning the situation into a laboratory experiment where all kinds of microorganisms go crazy.

The broken-down monochloramine molecules begin to generate minute amounts of dichloramine and trichloramine, which are noted to cause problems with the taste and odor of your drinking water compared to monochloramine.

Although trichloramine and Di are both formed by the breakdown of monochloramine molecules, they are not harmful.

It is the same thing that happens when people reuse portable water filters while they are camping. There is no problem keeping a filter nearby that can be stored in a dry environment. The problem is, as soon as you store the filter after it gets wet, bacteria begin to grow on the filter media as soon as it gets dry.

It isn’t long before you get sick on your next camping trip, and you can’t figure out why yet you used a water filter the last time you went camping.

Additionally, in the event of a natural disaster, the water reservoir might get affected by trihalomethanes causing muck in the water lines. I would not drink a lot of tap water due to the trihalomethanes that could be present in it.

What To Do

When there has been a long overdue shut-off of the water supply, when you turn the water back on, the water is likely to smell.

As a rule of thumb, it is recommended to let the water run for an additional five minutes and to keep it on until all the water has been flushed away.

As for whether or not the water is safe after that first flush, you need to do a sample tap test first.

Having a small amount of chloroform in the water won’t kill you, but it’s absolutely not something that you should ingest over an extended period of time. Boiling won’t accomplish much, but a good charcoal filter will provide you with a considerable amount of reduction.

There are many reasons why we all need water all the time. The idea of ionizing water, however, may not seem so attractive to most households for fear of the costs involved. Yet drinking alkalized water has a myriad of benefits.

The process divides alkaline minerals from acidic minerals, so the water you drink is 10 to 1000 times more alkaline than your original faucet. It also includes more stable oxygen that is vital for healthy cells. Cancer can live in a body that is starved of oxygen.

Oxidation is like rust on a pipe or what happens to an apple when it is cut-it turns brownish. Your body also oxidizes when it does not have enough antioxidants because it robs the electrons (which are provided by antioxidants) of healthy tissues to fight disease and aging.

Once you are deficient in the right electrons needed, your body begins to deteriorate and the process of aging and sickness begins to accelerate. Everyone knows that antioxidants combat free radicals that cause aging and illness so they try to get more of them from food and supplements.

However, most people are still deficient in them because they are unable to handle them properly. Once ionization occurs, the minerals are separated and charged with electricity, and your drinking water becomes alkaline.

This process also transforms it into a substance that contains an abundance of bioavailable antioxidants, such that your body can easily absorb and use. If you would like your body to recover from cancer, you need an abundance of antioxidants.

Ionized alkaline water has pools of water molecules that are much smaller than those of ordinary tap, well, or bottled water. Because these clumps of molecules are much smaller, your cells are capable of absorbing them (allowing you to super-hydrate), as well as the other two vital properties.

If your body is more capable of absorbing fluids, it is also more capable of pushing excess acids and toxins out of your body. The detoxification effect is extremely significant. Although a lot of your acids are neutralized by alkalinity, they still have to be expelled from your body.

No other substance in the world, except pure water flowing from the mountains (which naturally contain these properties), can do this for you. When you can neutralize acids, alkalize, antioxidize, oxygenate and detoxify your body day after day, you can cure yourself of everything.

Category: shower filters

The average carbon filter will not reduce or remove traces of chloramine. Some carbon filters will only reduce the chloramine content by 50%. Some filters contain charcoal, which will not reduce the chemical content. The filters will simply remove the chlorine smell and slightly improve the taste.

A multi-level water filter can remove chloramine by a high percentage, although the better purifiers will include vitamin C to increase the percentage of reduction to nearly 99%.

Category: shower filters

Everyone loses hair everyday. You ever heard the whole fact ‘ You lose 100 hairs every day!’-well whether 100 is an accurate number or not, you will lose a certain amount every day when the hair reach the end of their cycle.

When this ‘dead’ hair falls/detaches from your scalp, it might not immediatly fall off your head as it may be held within the rest of your hair by static or friction or maybe in a ponytail. This means it might not leave your head until it is brushed out, washed out in the shower, knocked out whilst styling, getting caught in your pillow or sweater or running your fingers through you hair. The problem with this is when women are worried about hairloss they sometimes refuse to wash (and sometimes even brush!) their hair for several days and then when they do, all of these lose hairs come out at once and it looks like loads! **

Shower filters are used to filter out the harmful chemicals from the water. They are also used to filter out chlorine, which can cause hair loss. The use of shower filters can help people who have sensitive skin and hair.

The debate over whether shower filters help with hair loss depends because what works for one person may not work for another. However, it is clear that using a shower filter can alleviate some of the damage that you do to your skin and your hair during your morning routine.

People ask this question because of the fear of getting the opposite results after purchasing a UV water filter. However, you shouldn’t have to worry because the UV water filters work.

These filters use ultraviolet rays to eliminate all the viruses, bacteria, protozoa, fungi, and more. The ultraviolet rays’ maximum concentration destroys the DNA of these microorganisms by penetrating through their cell wall and scramble the nucleic acid of their  DNA hence preventing them from reproducing, making the water safe and clean for drinking.

However, it’s important to note that some bacteria and protozoa such as Cryptosporidium and Giardia, have a thick cell wall that any amount of UV may not destroy them; therefore, it’s best to use the highest amount of ultraviolet rays to ensure 99.99% destruction of the bacteria in the water; and also to ensure that the specific UV light sterilization system is designed for such bacteria and viruses for you to observe effective results.

Also, you should note that the UV water filter only destroys the bacteria and leaves them suspended in the water and also does not eliminate chemical contaminants.

Therefore, it’s best to go for a UV filter that uses reverse osmosis to eliminate the bacteria and filter out their dead bodies floating on water to achieve an effective water filtration process.

If not, you can add pre-filtration systems such as sediment filters and carbon filters that filter out water and make it clear before it undergoes a disinfection process that effectively destroys all the bacteria present in the water hence making it safe and clean for drinking.

Category: shower filters

Vitamin C Shower filters work so well in removing chlorine from your water. Vitamin C shower filters perform well with any water pressure, low or high, and remain constant over the lifetime of the filter.

A KDF shower filter is a metal alloy consisting of copper & zinc which can be released into your shower water and be absorbed by your skin or inhaled into your lungs. The effects of this on the human body are as of yet unknown.

High levels of copper, not chlorine, in water, is responsible for “green hair” or “swimmers hair” in some people.Vitamin C is an all-natural medium and there are no known adverse side effects associated with Vitamin C dechlorination.

KDF has the potential to create an unusually high number of free radicals through the same process that is used to neutralize free chlorine. In the absence of free chlorine, the zinc and copper radicals will attempt to equalize themselves by stealing electrons as soon as possible creating a free radical chain reaction within the body’s cells.

Vitamin C is known for its ability to protect the body from the invasion of such free radicals.

Vitamin C shower filters require no complicated backwashing procedure. It will perform at optimum levels right up until it needs to be replaced.

In certain areas, you find tap water is the available water, but it’s very dirty for consumption and drinking because of its water source, and people opt to filter it to make it safe and clean for drinking.

Some people also believe that rainwater is the cleanest and safest for drinking without knowing that the atmosphere is contaminated. Also, the gutter may not be clean enough; therefore, it is best to filter any water before drinking.

Therefore this question comes up because many filtration methods in the market can make water safe for drinking. I would recommend a UV filter if you are researching water filtration methods for the safest and cleanest water.

I would do that because the UV filter does not use any chemical additives in the disinfection process that may alter the natural taste of the water or odor. Also, the UV filter ensures that all the contaminants are eliminated through ultraviolet rays. When discussing contaminants, I mean Protozoa, bacteria, viruses, and other harmful microorganisms present in the water.

 If you care about protecting your health at all costs, then you need the UV water filter since it will give you 100% confidence when drinking water because you will have the certainty that all the contaminants are destroyed.

Aquasana EQ-300 can filter out synthetic chemicals like prescription drugs, chlorine, lead, VOCs, THMs, herbicide and many more contaminants, while also softening the water.

The primary purpose of filtration is to make the water as healthy as possible. When considering the purchase of a whole house water filter and a water softener, you should keep a few things in mind.

1. One of the first things to look for is that a whole house water filter system utilizes a multi-stage filtration process that is certified by NSF. Typically, if your home is on city water, the whole home system goes before the water softener. This is to remove chlorine before it mixes with the resins inside of the softener.

2. If you use well water, then chlorine is not a problem you have to deal with. In this case, it is a good idea to have the whole house filtration system treats the home after the water softener.

3. The main purpose of a water softener is to remove high levels of “hard” minerals such as calcium. However, many whole house filters are capable of reducing iron, calcium and other hardening agents down to five microns, yet still, retain healthy minerals.

In other words, your home water filter system won’t be as effective at removing hard water, but will still perform similarly to a standard softener. The big difference being that no sodium is added, which is a lot healthier for you and your family.

Since the water softening process adds sodium, you are not distributing the purest water possible throughout your home. The water becomes so full of salt that it can be tasted. If your home currently does use a softener, the water you drink must be filtered at the point of use.

4. In addition to removing minerals, some softeners can also reduce other contaminants like heavy metals and sulfates. They nonetheless don’t even come close to the ultra-filtration capability of a high-quality whole house filtration system.

Since we need a reliable water filter that’s able to remove contaminants safely, Aquatru water filter is one such water filter that removes chlorine, lead, VOCs, THMs and other heavy metals to 5% or less, nitrates and nitrites from pastures and pesticides to less than 15 % and fluoride by at least 95% while leaving in natural minerals for the healthiest, best-tasting water.

Water filters are a very effective way of conquering even the worst water problems in your home. Here’s a brief explanation of how effective these water filters, filter your drinking water.

  1. Activated Carbon

This type of filter will remove organic contaminants; organic contaminants include chemicals that are most often responsible for taste or odor problems in your water. When water passes through this filter, the carbon particles will attract and remove these contaminants, which may include lead, mercury, copper, hydrogen sulfide, and chlorine.

There are two types of Activated Carbon filters available today:
a) Solid block activated carbon filters contain activated carbon particles compressed into dense material that the water has to travel through.

b) Granular activated carbon filters incorporate activated carbon granules, which your water has to pass through.

  1. Particle filter
    Particles are filtered out with a membrane-based on their size. The filters are rated depending on the number of microns that the pore size is in the membrane. A much smaller number of ore size will produce cleaner water. There are two types of materials that these filters will use:

a) Fiber filter will have larger pores that will stop the dirt but will allow contaminants dissolved to pass through.

b) Ceramic filter will be fine to screen out bacteria and parasites, and other small particles. However, this filter will not disinfect water.

  1. Resin water filter
    A resin filter has a filter cartridge made up of resins. It will remove contaminants such as heavy metals, including lead and minerals that can cause deposits in coffee makers and kettles.

Yes, there are a few instances where exposure to too much fluoride can be unhealthy. For instance, Excess levels of fluoride in water pose some health problems. If the fluoride level in your drinking water is more than 2mg/dl, then it poses a health risk.

Children under eight years old can develop “pits” as abnormalities in their dental enamel if they ingest too much fluoride over a period of time. However, these dangers are not applicable to fluoridated water. The quantity of fluoride in public water sources is simply minimal to cause one of these issues.

Fluoride was once prescribed as an Antithyroid drug!! It is of NO coincidence that more and more people have sluggish and weak thyroids. There is a clear correlation between a weak thyroid and Breast Cancer.

Established studies in China and Russia have found reduced T3 and increased TSH in populations exposed to fluoridated water.

Fluoride increases the oxidative stress in your body, which increases your risk of cancer.

Fluoride has been linked to a reduced IQ in children as well as increased plaques of the brain which leads to Alzheimer’s.

High levels of fluoride could prevent the enamel from forming, plus they affect the maturation of teeth. Besides, fluoride stains teeth. That’s mainly why the EPA has put regulations in place regarding the levels of fluoride in water supplies.

Fluoride accumulates in the pineal gland in the brain and causes it to harden.
Fluoride increases the sexual maturation of young females.

Everybody knows the advantages of drinking distilled water. It is safe to drink. Bottled water is good, but unfortunately, the detrimental environmental effects of drinking it and the economic burden offset its advantages.

For these reasons, more and more people are turning to filters to keep their water healthy. If you have been buying bottled water to make sure your water is clean, now is the time to switch to filtering your water.

You will have clean, healthy water that is the safest water to drink, without all the expense and trouble of bottled water if you install a water filter. You will be amazed at how to clean and smell your filtered water, and you know that the water is healthier. After six months it’s essential to replace your filters and you will always have clean water at a reasonable price.

Category: shower filters

Hard water also has a number of effects like damaging your skin and hair. Moreover, the costs associated with the purchase of excess quantities of soap and detergent for dishwashers, the repair of pipes and repair appliances generally become unbearable for those who do not reduce their effects.

Rather than try new shampoos or conditioners, an option you may have heard about is a water softener.

What Exactly Does a Water Softener Do?

When water gets into your house, the first thing it does is pass through a water softener, if you have one that is. Water first enters the mineral reservoir where millions of tiny salt-saturated resin beads substitute sodium for the hard minerals in the water.

The way it works is the mineral ions are negatively charged whereas the sodium ions are positively charged so they are forced to switch places. Once this occurs, the water then enters the home and is now known as freshwater.

The only difference between hard water and freshwater is that freshwater contains no calcium and magnesium minerals. The water softener can also remove other minerals like iron and any dirt or sediment from the water.

Water softeners can increase what you pay on your utility bills, can increase sodium levels in water and increase how much water you use as well.

There are some other solutions though that can work, such as using quality shower filters to filter out the heavy metals ; Calcium phosphate, calcium sulfate, magnesium hydroxide, barium sulfate, zinc phosphates, iron hydroxides, and silica that make your water hard. All of these minerals occur naturally in water.

Similar to filters used in potable water, shower filters contain layers of materials that remove chlorine and chloramines from shower water. Chlorine and chloramines are harmful chemicals for the skin that permeate the skin and hair fibers.

When you have a shower filter in your bathroom, your hair gets softer and the skin gets easier to handle. Hair and skin become significantly healthier.

It has also been shown that apple cider vinegar breaks down minerals such as magnesium and calcium that are often found in hard water, thus rinsing the hair. Stir one tablespoon of ACV into two cups of filtered water to create your own mouthwash.

Category: shower filters

Shower filters that use Vitamin C have become viral in recent years because they are the most effective in dechlorinating water from chlorine and chloramine.

Vitamin C shower filters are unique because they use ascorbic acid crystals as the main filtering agent. Most other shower filters use a combination of KDF (Kinetic Degradation Fluxion) and GAC (Granulated Activated Charcoal) as their filtering media. As regards chloramine and chlorine, these shower filters have been described as “average”.

In many lab tests by professionals and individuals, this Vitamin C shower filter has been shown to remove close to 99% of all chlorine from the water. You don’t need to worry about the temperature, pressure, or quality of the water, either. The Vitamin C shower filter works with any kind of water. An added benefit is this water filter may actually provide nutrients to your skin and hair, too.

Although some Vitamin C shower filters feature replaceable cartridges that can be purchased only when required, they are all extremely effective at removing all types of chlorine and chlorine odors from your water. The true beauty of this type of shower filter is what lies inside.

The Vitamin C shower filter is easy to install and can be used with your existing shower head. As long as your shower head is working effectively, so will this water filter.

Category: shower filters

The majority of the conventional shower filters will remove small amounts of chloramines and free chlorine from your shower.

KDF shower filters will only remove free chlorine. Their  effectiveness depends on how long the media stays in contact with the free chlorine. Longer contact times cannot occur in a shower filter, and this will limit its overall effectiveness.

But Vitamin C  shower filters will completely neutralize both chloramine and  free chlorine instantly upon contact through simple chemistry.

During the purchase of a water filter, you may want to know the lifeline of the UV water filter to acquire value for your money. UV water filters may last for a long time due to good maintenance, but they have systems that should be replaced to work effectively.

 The UV filters have a UV lamp that concentrates the amount of light to eliminate bacteria; this lamp has a display of 9000hrs and should be replaced annually for the UV filter to function effectively. After one year, the UV lamp stops working effectively; that’s why it is replaced annually.

Therefore it’s best to regularly clean and ensure its always clear for light penetration. Also, the sleeve should be replaced when it’s not clear enough to allow maximum light penetration to enhance the effective functioning of the UV water filter.

Furthermore, the UV water filters last for long, depending on how you maintain it. During the filtration process, it’s very important to maintain the added pre-filtration systems that filter out minerals and sediments such as the sediment filters and carbon filters. These filters should be changed after a certain period, and that’s by regularly monitoring the system to ensure that they’re all functioning properly.

Your Aquatru machine should tell you which filters to change. You are recommended to keep track of the filter when you install it. Yellow filters (every six months), Green filters (every 12 months), and Blue filter (every 24 months).

The value proposition of this water filter is that you use the pre-filter for six months, reverse osmosis for two years or 1200 gallons whichever comes first and the carbon filter for one year or 890 even though the frequency of usage and quality of water will determine how long you will filter.

During the disinfection process, the UV light destroys the bacteria DNA’s nucleic acid present in the water, depending on the effectiveness of the filter. You may be curious to know how long the UV light takes to sterilize the water.

The UV light sterilizes faster in 10 seconds if the distance to the bacteria is minimal, and there is the highest concentration of it. The distance of the light to the bacteria depends on how much time it takes to sterilize, and also the concentration of the light is a huge factor in sterilization time.

The higher the UV concentration, the faster the sterilization process, and vice versa. Also, the shorter the distance of the UV light to the bacteria, the faster the sterilization process and vice versa.

Much has been said about different water filter systems, but nothing comes close to the Aquasana Water Filter. Aquasana water filters have been rated as the top brand in water purifiers; the Aquasana AQ-4000 has been voted six years in a row for ‘Best Buy’.

The Aquasana system has been proven to remove waste and chemicals typically found in drinking water, including the highly potent Lead and Chlorine substances.

Why choose an Aquasana water filter? The Underwriters Laboratories conducted performance tests under NSF standards, and the favorable results were published and certified by the California Department of Health Services.

It’s among the best water filter in the market. Below are some of the advantages of owning an Aquasana Water Filter System according to its manufacturers:

1. Tested and certified by the California Department of Health for contaminant reduction claims

2. Tested under more challenging conditions to determine effectively of claims, i.e. for lead reduction efficiency, the system was tested at a level 10% higher (155-160) than the certification requirement 0f 150 parts per billion based on a 500-gallon test cycle.

3. Tested under real-life conditions by adding challenged chemicals to regular chlorinated tap water.

4. Uses selective filtration – a better way than distillation and reverse osmosis.

5.Uses a dual filtration system – filters out contaminants and leaves the natural trace of minerals.

6. More economical than most popular water filtration brand

7. Easy to install and easy to maintain

8. Backed up by excellent technical support

9. Has a lifetime warranty

The advantages outlined are advantages the manufacturers boast of. On the other hand, if you think that’s too much of hype because it’s coming from the manufacturers themselves, check out the benefits consumers report says about Aquasana.

·         Economical 
Since the Aquasana Water Filter is equipped with dual filtration, there is the main filter that will not need to be replaced for approximately 36 months, and a pre-filter that will have to be replaced every four months. What’s great is that the filters are one of the most affordable in the market.

 Safe
This system removes contaminants, but leaves behind any natural nutrients in the water. Water always contains natural minerals.

• Easy to Install and Maintain
There is an installation instruction that comes with the unit. When it comes to Maintenance, you have to change the pre-filter every four months and the main filter after three years. 

• Excellent Customer Service
The company has excellent customer service and technical support that you need at any time.

• Lifetime Warranty
Aquasana is so assured of the effectiveness of their product that they are not afraid to give out a lifetime warranty. That’s how confident they are!
In a nutshell, Aquasana water filters have what it takes to be among top water purifiers in the market.

Depending on the type of water you use, the pH of the water may change after filtering water with Berkey. Alkaline water is slightly sweeter than pure water. Pollutants increase the acidity in the water, and if you use Berkey water filter, it will filter out those contaminants and raise the alkalinity of the water providing clean drinking water.

Category: shower filters

Because chloramines persist in the water for longer than other disinfectants, they can have unexpected side effects. For instance, when this type of substance comes into contact with organic matter, it releases what are called disinfection byproducts or DBPs.

These by-products can be toxic. Some are even considered carcinogens in lab animals and might damage organs or weaken immune systems in people who are exposed to them.

Chloramines also increase the amount of lead that gets into the water if they come into contact with lead pipes. While almost all buildings no longer have this kind of plumbing, some older buildings still retain lead piping.

Ordinary water doesn’t pick up very much lead from them, however. Acidic water or drinking water treated with chloramines tends to leach more lead out of these antiquated pipes, increasing the danger to people who live in older buildings.

Category: shower filters

Chloramine is a combination of chlorine and ammonia. Have you ever mixed bleach and ammonia to clean? Of course not! The gases that come out from that mixture can quickly become deadly!

The chloramine gases in your home can irritate your eyes, nose, throat, and lungs.

If someone in your home suffers from asthma or emphysema high concentrations, it can lead to coma and death. I can’t overstate how frightening it is to struggle for a breath!

Category: shower filters

Many chloramines shower  filters utilize a multi-step process. The first phase involves activated carbon (AC)to eliminate various carcinogens in the water. They include THM, radon, and even pesticides.

Then the water might pass through a carbon block, and this carbon filter will remove harmful byproducts such as free chlorine and chloramine that entered the water during the disinfection procedure.

In addition, many filters will also include an ion exchange step, which is great to have because it will eliminate any traces of lead, and it will also balance the minerals in your tap water. In short, chloramines water filters are effective tools for good health and may become more popular as people start to learn more about the chloramines in their water

Category: Pur Water Filters

Make sure that the filter has been twisted firmly to seal the leaking seal and stop the leaks. If the leak originates from the top, it may be due to a sloppy installation. Just remove the filter and try to re-install it correctly. When the filter is correctly tightened, the water outlet must be at the bottom of the appliance.

Category: Pur Water Filters

A slow draining water dispenser could be an indication of the clogging particles or trapped water bubbles. The solution is to firstly submerge the filter into a large jar filled with water and see if it floats. If it floats, take out the filter and bang it against the sink carefully, not too hard. If it’s trapped particles you should clean and change filters.

pur water filter battery

The PUR Water Filter Battery is energy-efficient and designed to last up to 150 gallons of water, and will not require replacement for approximately 2 months.

PUR water filter, the battery does not require frequent change, however, once in a while, you may have to change the batteries in your PUR water filter occasionally,

However, whenever you see a flashing red light it could mean that either the filter system needs cleaning or replacement or that the battery is reaching the end of its life.

If you require to change the battery, it’s relatively easy to do so.

How to Replace PUR Water Filter Battery

First, remove the battery holder compartment from the upper portion of the PUR filter head. The PUR battery holder compartment is located directly on the top of the filter head.

Pull the compartment out from the top of the filter head. Then remove both expired batteries and replace them with new ones: slide the battery chamber until it switches on.

PUR water filters, like most water filters, are stackable. That means you can use them with many other filter products to make your life easier.

PUR filters are one of the most popular filters in the world judging by the number of times the phrase has been searched and has been used.

Some people have claimed that it’s the best filter in the market but this has to be supported by some evidence.

There are quite a lot of water filters for sale on the market, some other makes which are popular are Aquasana, Brita, Zerowater, and Clearly Filter. All of these have different features and qualities so why are people picking PUR in preference to these?

PUR seem to manufacture mainly Faucet or tap filters and Pitcher filters, they are also in business making replacement filters that will fit a wide range of other makes.

There is also a replacement filter that is specifically for side-by-side refrigerators such as Whirlpool and Kenmore. There must be one type that has caused the reason for the popularity of PUR.

We think the reason is likely to be the fact that they produce a faucet filter that has the ability to give different flavors to the filtered water, and the external look of these filters can have different colors.

With PUR, you can enjoy crystal-clear water every day of your life just like when you were little.

These water filters are ideal for households with children and the elderly because Its versatile, portable, and easy-to-use water bottle that filters up to 99% of bacteria, viruses, cysts, and other contaminants so you can enjoy cleaner water.

I love this PUR water filter. This is great because it has a reusable filter and the battery operated water filtration system. There is filtering with a few changes and then nothing. This one I can go on and on, and all my water will be filtered as needed.

Conclusion

The PUR Water Filter Battery is designed to eliminate the need to replace batteries as often as older filters did.

By using a battery that saves power, the PUR filters are able to do their job without draining large amounts of power. This means that you don’t have to change or recharge the batteries frequently and can save money on both replacement costs.

If you’re looking to save some money and decrease your carbon footprint, a countertop water filter with a reusable filter is the way to go. And PUR makes an excellent filter that is easy to install, use, and maintain. So if you’re ready to have clean, good-tasting H20 coming out of your tap at all times, this might be the project for you.

Category: Pur Water Filters
Pur water filter pitcher

PUR has developed a practical, simple-to-use, and highly effective home water filtration system. PUR Water Filter gets rid of these harmful substances like chlorine. Minerals and microbial cysts are also removed by PUR.

Besides performing its primary function of filtering contaminants, PUR comes with other smart features such as an LED indicator light.

The inbuilt LED indicator is a very useful tool that helps you know when you need to replace the filter cartridge. It tracks the cartridge’s life and when the filter’s life is over, it notifies you to replace the cartridge. 

Given that it tracks how long the filter was in the pitcher, the LED indicator is an ingenious feature.

What are the indications that PUR water filter is working correctly?

Typical signs that your PUR water filter is working properly include the following:

  • If a red light on the LED indicator blinks, it’s time to change the PUR filter.
  • Replace the filter if the pH falls outside of the usual range of 6.5 to 7.5.
  • Additionally, the conductivity and TDS need to be examined, and if they are outside of range, you need to change the filter cartridge.
  • Bad odors, sediment buildup, and slow filtering are typical indicators that filters and pre-filters are malfunctioning.
  • If the water dispenser frequently clogs or has a poor water flow, it might have a filtration issue.

Why does my PUR water filter light not work?

However, PUR water filter are not perfect, and they can sometimes have problems. One of these problems could be the LED light indicator.

The following are a few of the most typical causes of flashing red light and potential troubleshooting techniques you could use:

1. How to Set Up PUR Water Filter

The possibility exists that the new filter is not completely seated in the housing, which makes the indicator start giving a false warning. 

Verify that you installed the filter correctly in the water filter. If it’s not correctly installed, it may be necessary to press the filter into the housing until it snaps physically.

It is easy to set up the PUR water filter cartridge.

Simply follow these steps:

  • Remove the old cartridge by turning it counterclockwise after releasing the stopper.
  • Next, take out the new filter and give it a 10-minute soak in cold water.
  • Next, thoroughly rinse the pitcher after hand-washing it.
  • After washing the replacement cartridge, screw it into the pitcher with a clockwise motion to secure it.
  • Finally, pour cold water from the tray into the pitcher.

2. How to Reset the PUR Water Filter

Consider resetting your PUR water filter. To do so, press and hold the reset button for five seconds. If the light turns back on after a few seconds, your filter is operating correctly. You might also turn off your PUR Water Heater and wait 30 seconds.

Turn it back on and let it run for 60 seconds before turning it off again and waiting an additional 30 seconds. Repeat this process until your system resets itself.

3. How to Clean a Clogged PUR Water Filter

Another issue may be that the PUR water filter is clogged. If this is the case, try running the filter for a longer duration to remove any debris that has accumulated. If everything else fails, you may physically disassemble and carefully wash the water filter housing by hand and rinse well.

4. How to Replace Your PUR Water Filter

A new water filter may be required if the blinking remains after following these recommendations. If you have trouble finding the right replacement for your filter, check out our list of compatible filters here.

5. Contact Customer Care

Probably there’s too much dirt on the filter screen which might cause the light to turn red. However, if the indicator stays red, you may contact PUR customer service for assistance.

Their customer service seems to be second to none, and they seem to be willing to go the extra mile in order to ensure that each customer is satisfied with their purchase.


How does the PUR LED indicator work?

PUR filters water using an active carbon filter through a process called adsorption.

The mechanism of adsorption occurs when solid particles become attached and start collecting onto the filter surface.

The active carbon has pores that are small enough to hold the pollutants, but large enough to allow water molecules to pass through thus the contaminants are then removed from the water stream.

When the pollutant molecules are bound to the filter, they are removed from the system and do not circulate through the rest of your filter cartridge.

The amount of pollutants that are prevented from passing through depends on other factors also such as temperature, flow rate, and pressure.

Thus, through adsorption, the PUR water filter makes it possible for water to pass through while other materials which are pollutants stay behind on the filter’s surface.

When there is no longer any filtering of the water and the pores have become clogged thus no contact between the pollutant and the pores of the filter, the filter is said to be “dead.”  Thus the indicator will turn red to let you know, it’s time to replace the filter cartridge.

PUR Water Filter Blinking Green

.gb-grid-wrapper > .gb-grid-column-62f41270{width:50%;}@media (max-width: 767px) {.gb-grid-wrapper > .gb-grid-column-62f41270{width:100%;}}
.gb-block-image-6af2ff06{text-align:center;}
PUR Water Filter Light Not WorkingPUR Water Filter Light Not Working
.gb-grid-wrapper > .gb-grid-column-b7334084{width:50%;}@media (max-width: 767px) {.gb-grid-wrapper > .gb-grid-column-b7334084{width:100%;}}

An indicator with a green light means the water filter is working as intended and its effectively filtering the water you’re drinking.

This is one easy way of knowing that the PUR water filter is working effectively.

Your water filter should be blinking green. If you see a steady green light, that means your water filter isn’t functioning properly. You should contact PUR customer care to make sure they’re able to provide you with a new one.

If your filter has stopped blinking green completely, the problem could be the battery. You are thus recommended to replace it immediately.

PUR Water Filter Blinking Yellow

.gb-grid-wrapper > .gb-grid-column-6f122626{width:50%;}@media (max-width: 767px) {.gb-grid-wrapper > .gb-grid-column-6f122626{width:100%;}}
pur water filter light not working
.gb-grid-wrapper > .gb-grid-column-dec5ebfa{width:50%;}@media (max-width: 767px) {.gb-grid-wrapper > .gb-grid-column-dec5ebfa{width:100%;}}

The LED indicator of the water filter begins to blink yellow as the water filter becomes less effective.

The indicator is blinking yellow, indicating that the water filter is getting clogged and its becoming less effective in filtering the contaminants.

This is a clear indication that you should replace your current water filter soon.

PUR Water Filter Blinking RED

.gb-grid-wrapper > .gb-grid-column-e50f3d86{width:50%;}@media (max-width: 767px) {.gb-grid-wrapper > .gb-grid-column-e50f3d86{width:100%;}}
.gb-block-image-5096ce74{text-align:center;}
pur water filter light not working
.gb-grid-wrapper > .gb-grid-column-944c7572{width:50%;}@media (max-width: 767px) {.gb-grid-wrapper > .gb-grid-column-944c7572{width:100%;}}

The red light is a warning that your water filter needs to be replaced. The water filter has been clogged for some time and you should replace the filter immediately.

How to Replace PUR Water Filter Cartridge

Water filters are sensitive to contaminants and can break down over time. This is why it’s important to change your filter once when it starts blinking red or after 3 months.

It is easy to replace the PUR water filter cartridge.

Simply follow these steps:

  • Remove the old cartridge by turning it counterclockwise after releasing the stopper.
  • Next, take out the new filter and give it a 10-minute soak in cold water.
  • Next, thoroughly rinse the pitcher after hand-washing it.
  • After washing the replacement cartridge, screw it into the pitcher with a clockwise motion to secure it.
  • Finally, pour cold water from the tray into the pitcher.

After replacing, if the indicator does not start blinking green, the PUR pitcher filter light could be in standby mode.

Simply hit the reset button and hold it there for five seconds before letting go. The light will be automatically restarted.

If that doesn’t work, and you still see the red light flashing, then it means that there is something wrong with your filter or with how it was installed. At this point, it’s highly advisable to stick to the manufacturer’s instructions.

You can replace your old filter by hand-washing it with vinegar and letting it soak overnight in cold water. This is an easy way to fix any problems with your current filter without having to purchase a new one.

The only downside is that you don’t know exactly how long it will take for your filter to work correctly again after changing out the cartridge yourself.

If you have trouble finding the right replacement for your filter, check out our list of compatible filters here.

If you live alone, it is advised that you change the filter every 100 gallons or every 3 months. If you have a family, at least once a month, and once a month if you share a home with a significant other.

Conclusion

The PUR pitcher is a great pitcher overall and a great value. It ought to be your first choice if you require a filter that rests on your counter. It is a top-notch filter that works rapidly to get rid of contaminants so you may drink cool water.

Category: Pur Water Filters

White particles in drinking water are the result of dissolved minerals resulting in hard water that are not easy to remove from.

Another indicator of a bad water filter is if there are particles floating around in your glass of filtered water.

This means that there may be sediment built up on the filter which means that it needs to be replaced more frequently than usual.

If you’ve been noticing white particles in your filtered water that look like crystals, don’t panic. This is a common issue with water filtration systems and it doesn’t mean that the system is failing. Ideally, your filter should be replaced every six months to ensure maximum efficiency.

Pur water filters are all made from high quality materials and vary in their filtration abilities. Some are better for different situations than others, so find out what the needs of your household are before purchasing one. If you have hard water or a tendency to experience odd tasting drinking water (minerals can cause this) then a higher end model like the Super Pitcher is your best bet.

PUR filters are not the only ones to have these issues. All water filters will get this way after an extended use if you don’t properly clean and maintain them. Other types of filters (such as faucet/tap mount) may have more issues with these particles if they aren’t cleaned regularly. Anytime you have a water filter, you have to remember to follow the cleaning instructions and make sure you’re maintaining it to its best ability.

Lessen the risk of drinking water that has bacteria and contaminants by taking simple steps, like using a PUR water filter. It is cost effective and it may be good to consider buying one now.

Softening your water can help resolve issues with limescale and other particles that can cause problems with your devices. The point of a water softener is to reduce the concentration of dissolved solids, which raises the pH and ionic concentrations of water. As a result, metals are more likely to form precipitates and stable colloids, keeping the water from scaling up on many household appliances.

Distillation is the best way to get rid of particles.

Category: shower filters

When you go to the store to purchase a shower filter, it can be hard to know which one is best for your needs. But there are some quick and easy steps you can take at home to make sure that your filter is working well enough. The first step is to check the flow rate of the water coming out of the filter. If it has decreased by more than 10%, then it might be time for a replacement.

Some people might think that they only need a shower filter if they live in an area with a lot of chlorine or a dirty shower head, but this isn’t always the case. A lot of filters also remove chlorine from water as well as metals, sulfur, and other chemicals that can build up in our systems over time from drinking water and taking showers.

We use a UV filter to eliminate all the bacteria and viruses present in the water to make it safe and clean for drinking. However, it’s very hard to know that your water is safe for drinking after filtration from just a look or an assumption.

Yes, contaminated water may appear cloudy, but that does not give 100% certainty that if the water is clear it is free from bacteria, protozoa, and viruses. Therefore we tend to ask this question to have that satisfaction that the product is working effectively and worth the value for our money.

For you to know if your UV filter is working can be done by checking the lamp if it’s glowing, and if it isn’t, there may be a problem with the lamp, ballast, or just electric problems that can be fixed.

You may also check the bulb if it’s functioning well to radiate the UV rays that destroy the bacteria. It can be done by using a white piece of cloth or paper where you hold it against the light, and if it turns a violet shade, that means its working, and if it remains white, that means that the filter is not working and the water is still contaminated.

Category: Pur Water Filters

The light of the PUR of the filter is a useful signal that you need to replace the filter. Each system is uniquely configured, although they work the exact same way each time.

Water Filter lights are sometimes unable to function because of faulty battery replacement after a year.

The light on a filter could stop working properly or blink when the filter is not installed properly or the filter has been contaminated. Let us discuss a possible solution or answer the common questions about PUR Water Filter Light below.

How to Reset PUR Water Filter Light?

To reset the light button after replacing the PUR Maxion water filter, simply press and hold the reset button for 5 seconds. The indicator light will then turn green to indicate that it has been reset and is working optimally.

Turn it back on and let it run for 60 seconds before turning it off again and waiting an additional 30 seconds. Repeat this process until your system resets itself.

The Importance Of Having A Functional PUR Water Filter Light

The PUR water filter light is an inbuilt indicator that helps you know when the filter cartridge needs to be replaced.

The PUR water filter light is a very useful tool that helps you know when you need to replace the filter cartridge. It tracks the amount of time that has passed since the last change and also displays a blue, red, or green light depending on whether it’s time for a new one or not.

What kinds of PUR systems have a filter light?

PUR Systems are a type of water filter that is available in different types

  • standard,
  • maxion
  • Light.

The maxion system removes more contaminants than the standard system which is why it is better for those who want to filter out as many substances as possible

The PUR light system only filters out 95% of the contaminants, but it is designed to remove more chemicals and UV radiation than other systems.

Category: Pur Water Filters

Do you use filters when you first get them and they get painfully slow while you continue using them? Our family has been using a PUR pitcher for decades and loves them, but I bought another box of filters that looked like a bad deal.

It appeared fine initially but suddenly it began to filter slowly at an incredibly slow rate. It took me nearly two hours to fill up the cup!

I’m not sure that’s a good thing for our water-guzzled family. We have no problems with Google and I thought that Google might fix it.

Is that really the only solution? Thanks to some wise Amazon reviews, a friend learned that slow filters often mean water vapor is trapped. Other possible reasons are.

10 Reasons Why Your PUR Filter is Too Slow

1. Old filter that needs replacing

If you can’t remember the last time you replaced your PUR water filter, it’s probably time you consider doing so. Most manufacturers recommend changing your water filter every six months, but it really depends on how frequently you use it and what it filters out of your water.

Because carbon has the ability to absorb many of the chemicals found in water, it is used in most water filtration systems.

Thanks to the development of solid carbon block filters, water takes longer to filter, giving the carbon more time to absorb bacteria, pesticides, and other contaminating substances that can cause illness.

Failure to replace these carbon block filters according to the manufacturer’s instructions can jeopardize the absorption of harmful substances and force them into your drinking water.

Replacing your filter every six months prevents sediment buildup, which slows the filter and prevents it from filtering effectively.

Changing your water filter is simple, and all filters come with simple installation instructions. Most filters can be removed by turning the filter 1/4 turn to the left and pulling it out of the housing. To replace the filter, simply insert a new filter into the housing and turn 1/4 turn to the right.

2. Clogged filter

For many people, clogging is a common issue.

The pores of the membranes will trap sediments, but if your tap water contains a lot of sand, the membranes will become clogged or torn. If your filter isn’t working properly, you might as well not have one at all.

A clogged filter will slow the flow of water to the filter, extending the filter time and eliminating the need to filter the water.

You will require routine maintenance. When this filter becomes clogged, the system slows down. It causes a backlog of incoming water and can be extremely costly if it ruptures.

3. Flushing the filter incorrectly (or not at all)

A water filter cartridge is inserted into a water filter or filtering system and serves as the actual filter.

It removes small particles from the water, making it drinkable or making it taste better. Cartridges are designed differently depending on the product of your water system.

So be mindful of the water filter you use, as cartridges must be replaced on a regular basis to ensure that your water is properly filtered.

Replacement cartridges for water filters typically include usage recommendations as well as the amount of time the cartridge can safely stay in the filter.

To flush out the trapped carbon particles, the cartridges must be washed and flushed with a lot of water.

PUR water filter cartridges should be washed to flush out the trapped particles that can make the filter to be slow. After washing or cleaning, you can reinstall it back into the system.

4. Mineral damage

Hard water is water that contains high levels of dissolved calcium, magnesium, and other mineral salts such as iron.

Remember that if you are using tap water it will likely have dissolved solids such as calcium and magnesium that can clog up your filter more quickly than you’d like.

If you are using filtered water, keep in mind that the filter needs to be replaced after a while, just like your filter at home.

We’ve all seen the white film that builds up on appliances. It’s a telltale sign that water quality is not good.

If you see it on one appliance, it has probably started building up in the filter. The victims of limescale build-up include the shower head, sinks, dishwasher, and any place your water comes out of.

The blockage caused by mineral buildup is slowing down your water filter. To flush out the mineral deposit trapped inside the filters, carbon the cartridges must be washed and flushed with a lot of water.

5. Incorrect installation

It is possible that the new filter is not completely seated in the housing. Check that the filter was properly installed in the water filter. If the filter is not properly installed, it may be necessary to physically press the filter into the housing until it snaps.

6. Filter Housing Blockage

This may also mean that the water flow was restricted by the two curved holds inside the PUR water filter.

The solution is simply to remove the filter and stir vigorously until you hear the granules moving inside.

You may also physically disassemble and carefully wash the water filter housing by hand and rinse well.

7. Air bubbles in the filter

Air bubbles in the filter are a common problem that can slow down the filtering process.

Because of the continued siphon action, the filters can accumulate air pockets even when the faucets are closed.

This causes the filtered water to resemble milk or clouds. If the water remains stationary in a vessel or a carrier, the bubbles in the filtered water that cause the cloudy or milky appearance vanish over time.

Air pockets in filter cartridges can be removed by running water through the cartridge while turning it upside down.

8. High water pressure

9. Hot water damage

Filtering hot water through the filters is not recommended because it may cause the seals and tubes used in the filters to become soft and leak.

This is more likely in countertop filters than in shower water filters, which are less susceptible to such damage.

10. Low water pressure

Low pressure is usually caused by having to turn on two different plumbing fixtures at the same time, such as the outside garden hose, the kitchen/bathroom sink, the toilet, or even the shower.

Although your pressure may be adequate when only one fixture is in use, you will definitely notice a decrease in water flow when the second fixture is turned on. In most cases, low water pressure affects you in numerous other areas of your home.

Check for an obstruction inside the water filter if low pressure is affecting your water filter.

Conclusion

If everything else fails, contact customer care. Their customer service seems to be second to none, and they seem to be willing to help their customers with any issue that they might have.

Some customers’ reports indicate that they were handled with. The care reps were kind enough to chat regarding issues, and they resolved the issue right away. They were friendly, helpful, and genuinely seemed to care about taking care of their customers.

Recent posts

Acidic water is a solution in which the concentration of hydrogen is higher than what is present in pure water will have pH values below 7. Using your water ionizer to produce acid ionized or alkaline ionized water is equally beneficial.

Despite its cons, acidic water also has its benefits. One of the best uses for acid ionized water is for skincare. Since the human hair and the skin is mildly acidic, acid ionized water has the ability to restore the skin and hair’s natural metabolism and the results are almost instant. The skin is smoother skin and the hair becomes easier to manage.

A smoother and shinier hair removes years of wrinkles and prevents excessive dry and itchy skin and unnecessary cell damage, significantly reducing signs of aging. Acidic water is also known to treat athlete’s feet, minor burns, and insect bites.

Acid water has important home applications such as cleaning and sanitizing. The acidic composition has been shown to offer better cleaning and disinfecting ability on work surfaces and cutting boards.

Want to avoid dangerous salmonella and e-coli? This water is known to ensure your surfaces and plates are properly sanitized to keep you safe from these bacteria. It’s also optimal for cleaning fresh fruits and vegetables. Its removes pesticides and bacteria from such foods.

Acidic water is also useful when brushing your teeth and gargling after brushing for cleaner, healthier gums, and teeth. It has also been used for years in hospitals to treat bedsores, infections, and diabetic ulcers. It will help you avoid chronic diseases such as heartburn, constipation, diabetes, and migraines.

Acidic ionized water also keeps flowers, fresh staying a little longer. When used in the garden, it vastly reduces the number of pesticides you have to use.

For optimal health, you should consider using both acidic and alkaline water to restore balance in your body.

Category: shower filters

Although EPA regulatory agency has set the maximum safety standard for the amount of disinfectant in your drinking water at 3 to 4 parts per million or 4 milligrams per liter (mg/L)it is not truly known whether it is safe or not.

The number of cancer cases that can be traced back to these chemicals indicates that there may be no “safe” level.

Category: Pur Water Filters

Black particles are probably activated coal particles that have crept into the filtering process. The charcoal is not harmful. However, removal is done by washing your hands after replacing the water filter. Soak under water for 30 minutes, then wash and rinse. In that case, they are ready for use.

The black particles in your water may be a result of clogged filters or old mineral deposits on the inside of your faucet. To get rid of them:

1) Unscrew the cap from your faucet and remove it from its housing. Place it flat on a countertop or table so it’s easier to remove all the debris inside.

2) Use a toothbrush to scrub inside the faucet until you see that all debris has been removed — including any mineral deposits that may be causing this problem. If there are any mineral deposits left behind after scrubbing, you can try using a toothbrush with steel bristles instead of nylon ones like we showed here (they’re firmer).

3) Put all parts back into their housing and screw them back together tightly with pliers or a wrench if necessary!

Category: shower filters

There are four different types of shower filters. The first type is the granular filter which is made up of activated charcoal and removes chemicals and heavy metals from your water. The second type is a cartridge filter which removes anything that the granular filter misses and also makes the water smell better by adding chlorine-resistant odor removers.

The third type of shower filter is a carbon block one, this one removes chlorine and bad taste from the water as well as any bacteria that may be in it. Lastly, there’s the salt-based filter which uses salt to remove minerals from your water, making it softer to use on your skin.

These filters can be used with both hot and cold showers depending on the model you purchase.

Category: shower filters

A good shower filter should be able to filter out chlorine, heavy metals, and other chemicals from the water. It also needs to have a high rate of removal of dirt and sediment. It should not create a lot of noise while filtering the water.

The features include:

– High rate of removal for dirt and sediment

– Filters out chlorine, heavy metals, and other chemicals in the water

– does not reduce flow rate

Alkaline water provides benefits for the health and wellbeing of everyone. As acidic reflux becomes more common, it helps to reduce the level of free radicals in the body.

Ionized water imitates the molecular structure of natural, clean water from pristine sources. Drinking ionized alkaline water helps to keep the body’s pH at an alkaline level, which neutralizes excess acids.

It is especially important to maintain an alkaline pH and to improve the elimination of surplus acids and toxins from the body. Most well-known health problems such as arthritis, diabetes, hypertension, and obesity are all associated with acidity. And this is not the end of it.

The benefits of alkaline water can also contribute to reducing the risk of cancer and making cancer treatment more efficient. It acts to reduce the elements that promote the destruction of bones, such as telomeres that may lead to the destruction of cells.

It also helps the absorption of soluble vitamins during pregnancy and helps relieve constipation.

The antioxidant properties of ionized alkaline water constitute another important advantage of water consumption. Cells are more effective at detoxification; when cells are clean, they can absorb nutrients and minerals.

This avoids damaging the body’s cells and repairs damaged cells. You can see it more clearly in the form of decelerated aging and younger skin. It results in better health and performance.

Improved hydration is another of the benefits you could get from drinking ionized water with alkaline pH values. The brain, muscles, tissues, systems, and organs of the body do not function properly and at full capacity without thorough and complete hydration. You will feel its rejuvenating effect.

Category: shower filters

Hard water can cause various problems. These are some that a lot of people deal with on a regular basis:

1) Soap film left over the skin, making the skin dry.
2) Pipelines blocked by minerals in hard water.
3) Shampoo residue, which can cause your hair to be soft and dull.
4) White film on tableware and lenses.
5) Clothing that does not seem like much because there is not enough foam in the washing machine.
6) Different taste in tea, coffee and all that was boiling in tap water.
7) Build-up of ladder and film on bathroom and kitchen equipment.
8) Water heaters have a shorter life
9) The minerals in hard water reduce clothing life
10) Higher utility bills because of scale accumulation in water heaters

This only scratch the surface of what hard water can do to you and your household. What softening water does is replace all the mineral ions with sodium or potassium. This effectively eliminates the hardness in water and turns it soft.

Category: shower filters

There are many options for shower filters available on the market today. In order to find look for shower filters that utilize Vitamin C (Ascorbic acid), KDF (Kinetic Degradation Fluxion), or Chlorgon (Calcium Sulfite); with the Vitamin C and Chlorgon type shower filters also to protect against chloramine.

The combination of the mediums is due to their inherent pros and cons.The Vitamin C (l-ascorbic acid /sodium ascorbate) form has been used for many years by the EPA to dechlorinate wastewater before reintroduction into the environment.

Vitamin C is expensive even though they produce nearly perfect results without negatively impacting the environment or wildlife when disposed of.

Vitamin C dechlorination is all-natural, instantaneous In the lab, they use Vitamin C to dechlorinate lab samples because it provides near-perfect results and has even been used to dechlorinate water for kidney dialysis patients.

On the other hand, KDF shower filters can only remove free chlorine and its effectiveness is directly related to how long the media stays in contact with the chlorine. Vitamin C will instantly completely neutralize both free chlorine & chloramines.

GAC is known by the EPA as the best technology available to remove chemicals such as chlorine from the H2O supply in a home or business.

Nonetheless, GAC filters have been known to promote bacterial growth in a shower filter creating additional health concerns over time. The bacteria feed on carbon within the moist, warm confines of a shower filter and quickly multiply. This can lead to bacteria being released into the stream of shower water and onto your body.

Due to the slightly acidic environment within a Vitamin C shower filter, the growth of bacteria, algae, or fungi is discouraged.

So, in conjunction with a multi-stage filtering system, It is possible to get rid of 99.9% of the chemical by using sub-micron filtering which is used in.

Category: shower filters

There are various brands and types of chloramine and free chlorine shower filters in the market made to reduce chloramine and free chloramine. Shower filters have different filtration mediums and many  rely on KDF  as a method of removing chloramine and free chlorine.

Some of these shower filters  employ a combination of  KDF and Activated Charcoal (AC) or a similar kind of supplementary medium such as Vitamin C (sodium ascorbate/l-ascorbic acid).

The use of Vitamin C as a method of dechlorination has been used by the EPA for a number of years to dechlorinate wastewater before being reintroduced into water supplies.

Although vitamin C is a more expensive filtration medium, it’s the best method of dechlorination because it is all natural, instantaneous and provides near perfect results. It produces nearly perfect results without a negative impact on the environment.

Category: Pur Water Filters

Taste and odor are the things that most people find offensive and the reason that filters first came on the market.

If you have a water filter that gives you good taste and smell, but the water starts smelling bad after filtering it, these are the possible reasons.

Let us set some order in the matter.

The human body was designed to drink fresh fluids, with a balanced pH and a slight mineral content. A good filter can provide just the right pH and just a hint of minerals, if it includes an ion exchange step.

Odor: Rotten Eggs

Odor: Dirty or Earthy

Odor: Fishy Drinking Water

Odor: Bleach, Swimming Pool Smell

then it is time to replace the filter. While replacing the filter, you should also check if there are any other components inside the filter that might be causing the problem.

The drinking water distributed by municipal services is supposed to be safe because it has passed a thorough treatment, designed to remove, in a sequence of steps, one contaminant at a time.

Water Contamination however has many forms, as you can easily find if you are inclined to, and it is practically impossible to get pure water at the exit of the treatment plant. They will not even try.

In fact all services add chlorine or equivalent substances for disinfection, to make sure that pathogens and other harmful microbial parasites, viruses, bacteria and the like are killed or inactivated.

Nothing to brag about, if we think of purity. It is true that the treated water you get at your tap will not harm, generally, healthy adults.

It may still be quite dangerous to the health of children, babies, elderly or weakling persons and pregnant women, but it may be hard to prove the link.

Still odor, color and taste leave much to be desired, while additional undefined contaminants, not treated by the public service, may be coming from old piping systems.

You might decide, out of dismay, to depend on bottled water for drinking, hoping to have improved quality by a courageous leap. Unfortunately more often than not, bottled water is uncertain, inconstant, not better than plain tap water, as research has demonstrated.

Moreover the cost is prohibitive, if you care to sum up the expenses for a month or for a year, and if you consider transport and storage of the bottles. Moreover you should add the disposal of the empty plastic containers which are a nuisance for you and a scourge for the environment.

It is commonly agreed, and even recommended by official professionals, that a filtering system installed at the point of use, usually your kitchen faucet, will greatly improve the quality of the water you will drink, if you properly select, install and maintain (by periodic change) the home filter cartridges.

Many types of filters are available on the market. To select what will satisfy your needs you should probably check guaranteed performance and independent testing certifications, long time costs or economy of operation, and supplier’s reliability and commitment to the customers.

If the water filter smells of rotten garbage, it could be watered and the equipment or pipes you use have been contaminated with too much hydrogen sulfide. This means that your water filter is not capable of removing the funny smell. Try pushing the filter until it makes a click sound and then run 1-2 gallons of water out of it until the scent goes away.

If you notice a foul smell coming from your water machine, firstly make sure that there are no leaks in your plumbing system. If there are no leaks and if your filters are working properly, then check whether or not your faucet is leaking or has cracked pipes or fittings.

Can fish be a source of odors? Most filters for water contain carbon fibers, which can help eliminate odors in water. Carbon flakes are porous and absorb pollutants easily.

Can drinking contaminated water make you sick?

What are the risks of chlorine in drinking water? There are quite a few of them. Let’s start with one that is of utmost importance to parents.

What the EPA calls a safe level is only safe for a 150 pound adult or someone that weighs more. There are different safe levels for children, although facilities are not required to adhere to those lower levels! It is up to parents to find out what they are and find out what the level in their supply might be.

Children and small adults that consume the maximum safe level can develop anemia. That is one of the reasons that tap-water is not to be used when mixing infant formula. Parents are advised to use bottles or jugs of nursery water for mixing formula.

But, a safer alternative is to install a high quality filter on the kitchen tap. It’s actually less expensive and easier, too.

Developing digestive disorders, such as irritable bowel, chronic diarrhea or acid reflux disease are among the risks of chlorine in drinking water. The pH level is unsuitable for good digestion.

But the risks of chlorine in drinking water are not the greatest risk that we are faced with, when it comes to what is coming out of our taps.

Decades ago, scientists believed that it was the chlorine or the chloramines that caused the increased cancer incidence that was seen in urban communities. Now, they know that it is not the chemical disinfectants themselves, but the byproducts released when the disinfectants react with bacteria that are to blame.

The byproducts are referred to as disinfection byproducts or trihalomethanes or THMs. If you get a quality report from your local treatment facility, it should include a line for THMs.

Why does my filtered water taste like chlorine?

Ineffective filter

Filtered water tastes metallic

Is drinking water that tastes like chlorine safe?

Is bad-tasting water harmful?

The value proposition of this water filter is that you use the pre-filter for six months, reverse osmosis for two years or 1200 gallons whichever comes first and the carbon filter for one year or 890 gallons and then dispose of the whole thing. The Aquatru displays light to keep track of the working condition of the filter. Yellow filters (6 months), green filters (12 months) blue filter (24 months).

Drinking high-quality alkaline water, not only supplies your body and blood with the stable oxygen you need, but it also detoxifies and super-moisturizes you naturally. All these properties help combat free radicals that continually threaten to shorten your life through disease and rapid aging.

Ionization converts ordinary tap water to natural minerals and oxygen and antioxidants are created. Illnesses do not develop in an alkaline environment that is full of clean oxygen – it develops in an acidic, dehydrated, oxygen-free environment.

When you drink the ionized water, it helps your body neutralize the acid waste (toxins) that disease thrives on.

Since this antioxidant property comes from the “electrolyzed” enhancement to the water, these antioxidants do not have to go through the metabolic process before being utilized. They are able to go directly to the cell walls to prevent and repair free radical damage in an efficient and powerful way.

They also act as a “carrier” to help convey the antioxidant properties of foods and supplements in a deeper way. Cellular health is guaranteed by adequate hydration, detoxification, and oxygen

Oxygen-rich cells contribute to optimal health. Oxygen in the bloodstream, it’s like fresh oil in the car. The clean oil keeps your car properly lubed and works like a top.

The oxygen in your blood means that your blood is capable of circulating at a regular and regular pace so that your heart can pump easily. More oxygen is the result of more energy, mental clarity.

Category: shower filters

Protecting yourself from water contaminants should be one of your top priorities. There are many risk factors for chloramine. Let’s break down some properties of chloramine.

Chloramine is a group of three different chemicals; Monochloramine (NH2CL), Dichloramine (NHCl2), and trichloramine (NCl3).

These chemicals are closely related and will easily shift into each form depending upon a variety of factors such as water pH, temperature, turbulence, and even ratio of Chlorine to ammonia.

Like Chlorine, Chloramines are also respiratory irritants and as stated above when Chloramines react to organic substances in water supplies this can cause THMs, which have been linked to cancer.

Like Chlorine, Chloramines are also respiratory irritants and as stated above when Chloramines react to organic substances in water supplies this can cause THMs, which have been linked to cancer.

THMs are created as a byproduct of free Chlorine coming in contact with organic material present in the water supply. However, the good thing about Chloramine is that it produces a lower amount of THMs.

The danger of long-term exposure to THMs is an increased risk of cancer; especially certain types of cancer. Bladder and colorectal cancer are among the ones that are seen more frequently in communities serviced by public treatment facilities.

The danger of long-term exposure to THMs is an increased risk of cancer; especially certain types of cancer. Bladder and colorectal cancer are among the ones that are seen more frequently in communities serviced by public treatment facilities.

One other concern with chloramine is that it stays in the pipes and can then cause the lead to leech into the water.

To protect yourself from chloramine through the following;
1) Install a whole house water filtration system.
2) Install a filtration system at your sink.
3)Use a shower filter.
4) Drink bottled water.

Category: shower filters

Chloramine might cause leaching of  lead from lead pipes. The presence of lead in the water supply might cause poisoning. Lead poisoning can cause illnesses such as neurological damage, health problems and even death in young children.

During a warm shower contaminants such as free chlorine, get very unstable in the  hot water and instantly begin to evaporate out of the water. You then begin to inhale the vapor directly into the lungs.

The level of chlorine might vary during the day, but constant exposure to high concentrations of chlorine can lead respiratory illness and in other cases  miscarriage.

Category: Pur Water Filters
Why Is My Pur Water Filter Blinking Red After A Filter Change?

PUR water filters are able to filter out a wide variety of contaminants, including bacteria and other pathogens. However, they are not perfect, and they can sometimes have problems. One of these problems could be the LED light indicator.

The LED indicator on the PUR water filter is a simple but essential way to check if the filter is working properly.

Generally, the PUR water filter has a lifespan of thirty days or sixty days even though it depended on the number of gallons dispensed.

If you live alone, it is advised that you change the filter every 100 gallons or every 3 months. If you have a family, at least once a month, and once a month if you share a home with a significant other.

After changing the filter, and resetting the LED indicator, the filter light should turn green. If the indicator continues to blink red, after a filter replacement, there are many possible explanations.

The following are a few of the most typical causes of flashing red light and potential troubleshooting techniques you could use:

1. How to Set Up PUR Water Filter

The possibility exists that the new filter is not completely seated in the housing, which makes the indicator start giving a false warning. 

Verify that you installed the filter correctly in the water filter. If it’s not correctly installed, it may be necessary to press the filter into the housing until it snaps physically.

It is easy to set up the PUR water filter cartridge.

Simply follow these steps:

  • Remove the old cartridge by turning it counterclockwise after releasing the stopper.
  • Next, take out the new filter and give it a 10-minute soak in cold water.
  • Next, thoroughly rinse the pitcher after hand-washing it.
  • After washing the replacement cartridge, screw it into the pitcher with a clockwise motion to secure it.
  • Finally, pour cold water from the tray into the pitcher.

2. How to Reset the PUR Water Filter

Consider resetting your PUR water filter. To do so, press and hold the reset button for five seconds. If the light turns back on after a few seconds, your filter is operating correctly. You might also turn off your PUR Water Heater and wait 30 seconds.

Turn it back on and let it run for 60 seconds before turning it off again and waiting an additional 30 seconds. Repeat this process until your system resets itself.

3. How to Clean a Clogged PUR Water Filter

Another issue may be that the PUR water filter is clogged. If this is the case, try running the filter for a longer duration to remove any debris that has accumulated. If everything else fails, you may physically disassemble and carefully wash the water filter housing by hand and rinse well.

4. How to Replace Your PUR Water Filter

A new water filter may be required if the blinking remains after following these recommendations. If you have trouble finding the right replacement for your filter, check out our list of compatible filters here.

5. Contact Customer Care

Probably there’s too much dirt on the filter screen which might cause the light to turn red. However, if the indicator stays red, you may contact PUR customer service for assistance.

Their customer service seems to be second to none, and they seem to be willing to go the extra mile in order to ensure that each customer is satisfied with their purchase.

Conclusion

Ultimately, I’d recommend waiting until you get the defective product replaced. We put the above steps as an alternative if you don’t want to deal with getting your defective product refunded or replaced. Overall though, we recommend getting the replacement/refund first.

Latest Posts

Category: shower filters

Below is a couple of the major reason you should buy a shower filter.

Harmful Contaminants
Most municipal water systems are not designed to remove the complex chemicals that are finding their way into our water sources, and they add chlorine (a known carcinogen) to kill bacteria, yet some of those bacteria are actually chlorine resistant.

Here are some of the main concerns we all share about our drinking water:
1) Chlorine and chloramines
2) Volatile Organic Compounds (pesticides, herbicides, etc.)
3) Heavy metals
4) Bacteria and viruses (Giardia and Cryptosporidium)
5) General Sediment
6) Discarded, expired and unused prescriptions flushed down the toilet
7) Fluoride

Some water filtration systems are designed especially to remove lead particles, while others may be specialized to remove chlorine. But neither of these two filter types may be able to remove microorganisms like bacteria. For this purpose, special filters are used. To find the right filter for your needs check out a summary of water filter types.

Most issues with taste are caused by organic elements in the water such as surface contamination at the source (perhaps a river or reservoir), Chlorine added by the water company to kill bacteria and microorganisms, or sulfur. The things that make the water taste bad can also make your cooking and your coffee not taste as good as they should.

Carbon filters are convenient and economically improve the taste of water but do not remove lead, dissolved inorganic particles, or other harmful material. To determine the best system for you see a good site on Filtration Methods or Filter Types.

Physical Effects on Your Skin and Hair
Water that isn’t pure can make your skin dry and cause rashes, make your hair dry and brittle, cause you to use more soap when washing clothes, and possibly allow contaminants to be absorbed through the skin while bathing or showering. Again, to determine the best system for you, see a site on Filtration Methods or Filter Types.