PUR Water Dispenser Not Draining

Category: Pur Water Filters

If your PUR water dispenser is not draining, there are a few possible reasons why this may be happening. Here are some steps you can take to troubleshoot the issue:

  1. Check the water tank to make sure it is not overfilled. If the water level is too high, it can prevent the dispenser from draining properly.
  2. Make sure the dispenser is properly connected to a working water source. If the water supply is turned off or there is a problem with the plumbing, the dispenser may not be able to drain properly.
  3. Check the drain hose to make sure it is not clogged. If the hose is clogged, water will not be able to flow through it and the dispenser will not drain properly.
  4. Clean the dispenser according to the manufacturer’s instructions. Over time, sediment and other debris can build up in the dispenser and cause it to not drain properly.

If you’ve tried these steps and your PUR water dispenser is still not draining properly, you may need to contact the manufacturer for further assistance.Try again

A slow-draining water dispenser could be an indication of the clogging particles or trapped water bubbles. The solution is to firstly submerge the filter into a large jar filled with water and see if it floats. If it floats, take out the filter and bang it against the sink carefully, not too hard. If it’s trapped particles you should clean and change filters.